Advances in deep learning methods for pavement surface crack detection and identification with visible light visual images

Compared to NDT and health monitoring method for cracks in engineering structures, surface crack detection or identification based on visible light images is non-contact, with the advantages of fast speed, low cost and high precision. Firstly, typical pavement (concrete also) crack public data sets were collected, and the characteristics of sample images as well as the random variable factors, including environmental, noise and interference etc., were summarized. Subsequently, the advantages and disadvantages of three main crack identification methods (i.e., hand-crafted feature engineering, machine learning, deep learning) were compared. Finally, from the aspects of model architecture, testing performance and predicting effectiveness, the development and progress of typical deep learning models, including self-built CNN, transfer learning(TL) and encoder-decoder(ED), which can be easily deployed on embedded platform, were reviewed. The benchmark test shows that: 1) It has been able to realize real-time pixel-level crack identification on embedded platform: the entire crack detection average time cost of an image sample is less than 100ms, either using the ED method (i.e., FPCNet) or the TL method based on InceptionV3. It can be reduced to less than 10ms with TL method based on MobileNet (a lightweight backbone base network). 2) In terms of accuracy, it can reach over 99.8% on CCIC which is easily identified by human eyes. On SDNET2018, some samples of which are difficult to be identified, FPCNet can reach 97.5%, while TL method is close to 96.1%. To the best of our knowledge, this paper for the first time comprehensively summarizes the pavement crack public data sets, and the performance and effectiveness of surface crack detection and identification deep learning methods for embedded platform, are reviewed and evaluated.Comment: 15 pages, 14 figures, 11 table

Voltage Build-Up Analysis of Self-Excited Induction Generator With Multi-Timescale Reduced-Order Model

Self-excited induction generator (SEIG) has received a lot of attentions for its increasing application in distributed generation systems with the essential feature of low cost. To analysis, the dynamic and transient performance of SEIG, several modifications of the mathematical models have been developed for improving the regulation of voltage and frequency. But these models are still complicated to be used in practice. Based on the transient equivalent circuit, a reduced-order model of SEIG with complex transformation in the two-phase stationary reference frame is realized for the transient analysis of voltage build-up. In this simplified model, the coefficients of the characteristic polynomial with multi-timescale time constants are proposed. Moreover, the physical interpretation of system transient behavior with the reconstructed time constants is established and visualized. Particularly, the upper and lower limits of the capacitance and speed for the SEIG with different parameters variation are simulated and analyzed respectively. The validation and the accuracy of the SEIG model are verified for the transient analysis of the voltage build-up. It is proved that the reduced-order model can be effectively used to insight the dynamic stability of SEIG voltage build-up with the multi-timescale

A Lightweight Fault-Detection Scheme for Resource-Constrained Solar Insecticidal Lamp IoTs

The Solar Insecticidal Lamp Internet of Things (SIL-IoTs) is an emerging paradigm that extends Internet of Things (IoT) technology to agricultural-enabled electronic devices. Ensuring the dependability and safety of SIL-IoTs is crucial for pest monitoring, prediction, and prevention. However, SIL-IoTs can experience system performance degradation due to failures, which can be attributed to complex environmental changes and device deterioration in agricultural settings. This study proposes a sensor-level lightweight fault-detection scheme that takes into account realistic constraints such as computational resources and energy. By analyzing fault characteristics, we designed a distributed fault-detection method based on operation condition differences, interval number residuals, and feature residuals. Several experiments were conducted to validate the effectiveness of the proposed method. The results demonstrated that our method achieves an average F1-score of 95.59%. Furthermore, the proposed method only consumes an additional 0.27% of the total power, and utilizes 0.9% RAM and 3.1% Flash on the Arduino of the SIL-IoTs node. These findings indicated that the proposed method is lightweight and energy-efficient

Stomatal responses of terrestrial plants to global change

Quantifying the stomatal responses of plants to global change factors is crucial for modeling terrestrial carbon and water cycles. Here we synthesize worldwide experimental data to show that stomatal conductance (gs) decreases with elevated carbon dioxide (CO2), warming, decreased precipitation, and tropospheric ozone pollution, but increases with increased precipitation and nitrogen (N) deposition. These responses vary with treatment magnitude, plant attributes (ambient gs, vegetation biomes, and plant functional types), and climate. All two-factor combinations (except warming + N deposition) significantly reduce gs, and their individual effects are commonly additive but tend to be antagonistic as the effect sizes increased. We further show that rising CO2 and warming would dominate the future change of plant gs across biomes. The results of our meta-analysis provide a foundation for understanding and predicting plant gs across biomes and guiding manipulative experiment designs in a real world where global change factors do not occur in isolation

Neurophysiological Defects and Neuronal Gene Deregulation in Drosophila mir-124 Mutants

miR-124 is conserved in sequence and neuronal expression across the animal kingdom and is predicted to have hundreds of mRNA targets. Diverse defects in neural development and function were reported from miR-124 antisense studies in vertebrates, but a nematode knockout of mir-124 surprisingly lacked detectable phenotypes. To provide genetic insight from Drosophila, we deleted its single mir-124 locus and found that it is dispensable for gross aspects of neural specification and differentiation. On the other hand, we detected a variety of mutant phenotypes that were rescuable by a mir-124 genomic transgene, including short lifespan, increased dendrite variation, impaired larval locomotion, and aberrant synaptic release at the NMJ. These phenotypes reflect extensive requirements of miR-124 even under optimal culture conditions. Comparison of the transcriptomes of cells from wild-type and mir-124 mutant animals, purified on the basis of mir-124 promoter activity, revealed broad upregulation of direct miR-124 targets. However, in contrast to the proposed mutual exclusion model for miR-124 function, its functional targets were relatively highly expressed in miR-124–expressing cells and were not enriched in genes annotated with epidermal expression. A notable aspect of the direct miR-124 network was coordinate targeting of five positive components in the retrograde BMP signaling pathway, whose activation in neurons increases synaptic release at the NMJ, similar to mir-124 mutants. Derepression of the direct miR-124 target network also had many secondary effects, including over-activity of other post-transcriptional repressors and a net incomplete transition from a neuroblast to a neuronal gene expression signature. Altogether, these studies demonstrate complex consequences of miR-124 loss on neural gene expression and neurophysiology

Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)

In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. For example, a key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process versus those that measure fl ux through the autophagy pathway (i.e., the complete process including the amount and rate of cargo sequestered and degraded). In particular, a block in macroautophagy that results in autophagosome accumulation must be differentiated from stimuli that increase autophagic activity, defi ned as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (inmost higher eukaryotes and some protists such as Dictyostelium ) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the fi eld understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. It is worth emphasizing here that lysosomal digestion is a stage of autophagy and evaluating its competence is a crucial part of the evaluation of autophagic flux, or complete autophagy. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. Along these lines, because of the potential for pleiotropic effects due to blocking autophagy through genetic manipulation it is imperative to delete or knock down more than one autophagy-related gene. In addition, some individual Atg proteins, or groups of proteins, are involved in other cellular pathways so not all Atg proteins can be used as a specific marker for an autophagic process. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field

Phase-change memory (PCM) study

In this work, two aspects of phase change memory: information storage cell and access device are studied to give some design guidelines of PCM. To better understand characteristics of the storage cell of PCM, fabrication has been conducted in Nano Fabrication Facility of HKUST and Dalian University of Technology. Both the PN diode and FETs access devices are studied. An analytic model of PN diode access device is developed to further optimize its performance. The model includes non-uniform current flow in the buried contact layer, injection current to the substrate, and disturb current to neighboring cells. Model is verified by extensive 3-D numerical simulations. Based on the model, the impact of various geometrical parameters on the memory array performance can be predicted before actual fabrications. Performance of FETs are then studied in the sub-90nm technology node, which will bring in a lot of extra effects like quantum mechanics modification, poly depletion and so on. At last, circular surrounding gate MOSFET performance is compared with PN diode to find an optimal access device for PCM application

Triple-frequency TurboEdit Cycle-slip Processing Method of Weakening Ionospheric Activity

The existing triple-frequency cycle-slip detection method usually can not detect and repair the cycle-slip correctly in the ionospheric activity phase or when the magnetic storm happening. To solve the problem, the triple-frequency TurboEdit method for weakening the ionospheric error is advanced based on the dual-frequency TurboEdit method. Both the triple-frequency geometry-free and ionospheric-free combination and second-order time-difference phase geometry-free combination in this algorithm can whittle the influence of ionospheric error effectively. And then, the triple-frequency data is used to validate this algorithm, the experiment results show that this method can weaken the ionospheric error and realize the no-difference dynamicreal-time cycle-slip detection and correction under ionospheric activity phase